Types of Molding Processes

Different types of molding processes form plastic into the desired shape based on the plastic’s intended use. Plastic manufacturing relies on different types of molding in a variety of shapes. Plastic is a synthetic material that is soft or semi-liquid when hot. The soft plastic is placed in molds, and then the plastic cools, or sets. After setting, the plastic is in the desired shape and is removed from whatever types of molding were used to create it. Thermoplastics can be melted down and reformed if necessary, however thermoset plastics cannot be reheated.

Plastic Molding Using Casting

Plastic molding using casting is the simplest method as plastic manufacturing as it requires the least amount of complex technology. Plastic is simply heated so it turns into a fluid, and then transferred into a mold. The plastic is left to cool and the mold is removed. This process can be used for intricate shapes and is performed under low pressure.

Injection Molding of Plastic

Injection molding of plastic creates high-quality three-dimensional objects that can be commercially reproduced. The injection molding process begins by melting plastic in a hopper. The melted, liquid plastic is injected into a tightly closed, chilled mold. The plastic quickly takes the shape of the surrounding mold. Once it has completely set, the mold is opened to release the plastic object. The mold can generally be used many times before needing to be replaced. Plastic items such as yogurt cups, butter tubs, plastic toys and bottle caps use the injection molding process.


Blow Molding Plastic Manufacturing

Blow molding is a process used for making hollow objects such as piping or milk bottles. In the blow molding plastic manufacturing process, plastic is heated until molten. The liquid, molten plastic is injected into a cold mold. The mold has a tube set within it, which has a particular shape when inflated. While the plastic is molten, air is blown into the tube and the plastic is formed around the tubing. The plastic is left to cool and removed from the mold.

Compression Molding of Plastic

Compression molding of plastic is the most labor-intensive type of molding process. Since compression molding is more complicated, it is typically only used for large-scale production purposes rather than mass production. For example, boat hulls and car tires are made using the compression molding method. Molten plastic is poured into a mold. Then a second mold is pressed into it. This squeezes the plastic into the desired shape before the plastic is left to cool and removed from the mold.

Rotational Molding of Plastic

Toys, shipping drums, storage tanks and consumer furniture made of plastic are all made using rotational molding. In this method, liquid plastic forms each object as it is added to the mold from the inside. Two mechanical arms hold the mold in place. The arms constantly rotate the mold at the same level, while molten plastic is placed inside. As the mold turns, the plastic coats the inside of the mold to create a new hollow, plastic object.

Original Source

Terms and Conditions of Purchase
Terms and Conditions of Sale
  Privacy Policy
CA Privacy Notice
 Copyright © 2024 CEW. All Rights Reserved. linkdin